Search
Current filter
Interface PCB Rowe Ami for connection of electronic coin validator
With this relay pcb you can simply realize different applications with an electronic coin validator. Depending on configuration of the electronic coin validator you can contact potential free both relays contacts for timing circuits, expenditures for impulse, sales procedures use etc. with two prices.
Wake UP sensor for electronic coin validator with battery operation.
Interface cable RM5 CC-talk to Smart Hopper
This testbox was developed in order to test quickly and reliable electronic coinvalidators as well as banknote validators.
Information about amount, time assets, remaining amount etc. is indicated to elements depending upon configuration of the electronic Coin validator or key system with 14 mm red LED 7-Segment.
Connect PDAs, digital cameras, modems, and other serial devices to your USB port with this high performance USB to Serial adapter.
with this interface you can connect all coin validator RM5 variants which use the exit 2 and 3 for the output signal.
Ribbon cable 10 conductor with two junction plug to connect externial devices like testbox, coin meter, separator, a.s.o.
This cable is replaced necessarily if a common coin validitor (parallel coin exit ) by an RMX20.
4-digit display for RM5 coin mechanism and EuroKey Plus system.
Interface for Soocertable with electronic coinvalidator RM5
Cable connection with integrated RS232 interfaces converters. These cables is required for the connection of a RM5 to the PC.
+12V at Pin No. 10
4 conductor harness with plug, to connect the RM5XCC Talk with the CC Talk hub art.no.: 9930500503
Cable with integrated RS232 converter between CC-Talk HUB (art.no.9930500503) and PC RS232
Interface cable connects RM500 CC talk coin validator with the RS232 interface of your PC's. The current supply for the coin validator is supplied by way of the external cable.
Interface with harness and coinmeter.
Cable for RM5F T Timer und Vending
10 conductor ribbon cable with 2x5 pin female connector with strain relief at both ends.
Supply cable for RM5 USB coin validator
Cable for RM5 USB coin validatorr
Harness from Universal Interface module eSSP to Smarthopper and NV200 Smartpayout.
Cable from Powersupply/Interface RM925 and Relaysboard to Display for RM5 electronic coinvaliadator
16 conductor ribbon cable with 2x8 pin female connector with strain relief at both ends.
10-pin ribbon cable for RM5 coin acceptor changes outputs 2 to output 3. Required to be compatible with NRI or Alberici coin acceptors.
connects a coin mech to the SMART Hopper for ccTalk communications
Parallel 2x16 LCD display, for electronic coin acceptors.
Remote reject kit to enable unjam of the electronic coin acceptor from remote.
{{.}}
{{{.}}}
